XBOX 

Hooking Up An Xbox 360

Hooking Up An Xbox 360. Attach your xbox 360 networking adapter to the back of the console and flip up the antenna. As with the hd a/v component cables, once these are all connected, turn on your television and your xbox 360 console.

How to Hook up an Xbox 360 7 Easy Steps (with Pictures)
How to Hook up an Xbox 360 7 Easy Steps (with Pictures) from www.wikihow.com

Press and hold the guide button, which is the xbox logo in the middle of the controller. Turn on your modem and router. Insert the av connector on the cable into the xbox 360.

After That, Turn On The Monitor And The Xbox To Inspect The Video And Audio Configuration.

Then it would help if you supplied power on xbox from electric outlet cause it doesn’t take power from tv. Plug the usb cable into the usb port on the back of your console. The lights on the headset will indicate which controller it is assigned to.

You'll Find The Ethernet Port Below The Aux Port On The Original Xbox, Xbox 360 E And Xbox 360 S Editions, And It's Located Next To The A/V Port On The Original Xbox.

Do not put other objects on, under, or right next to the console. Both audio and video are carried on the same cable. Pressing it will cause the xbox 360's light to begin circling the power button.

Attach Your Xbox 360 Networking Adapter To The Back Of The Console And Flip Up The Antenna.

If your monitor has a composite port, skip this step! Then attach the other side of the adapter to the input port of hdmi in the monitor. Make sure that the location for your console is as follows:

Connect The A/V Connector To The A/V Port On Your Xbox 360 Console.

Turn off and connect the consoles. Make sure the xbox 360 is powered on. Setup gaming console to monitor connection.

Use Analog Audio And Hook Up With The Rca Cables.

Attach the hdmi cable into the xbox console’s hdmi port. Turn on your modem and router. Line up the adapter with the two slots on the back left corner of the xbox 360.

Related posts